U-Joint Kit 25mm Inside Snap Rings Steel Rear Driveshaft Compatible with 1987-2018 Suzuki King Quad LT-A 750X 500X Kawasaki Teryx 750 ATV UTV Replaces 27200-73813 13310-0018 All Balls

<b>Applications:</b><br> • Suzuki LT-4WD 250 QuadRunner — 250cc (1987-2002)<br> • Suzuki LT-F 250F QuadRunner 4x4 — 250cc (1988-2001)<br> • Suzuki LT-F 4WDX King Quad 300 — 300cc (1991-2002)<br> • Suzuki LT-F 300F King Quad 4x4 — 300cc (1999-2004)<br> • Suzuki LT-F 500F QuadRunner 4x4 Manual — 493cc (1998-2001)<br> • Suzuki LT-A 500F QuadMaster 4x4 Auto — 493cc (2000-2001)<br> • Suzuki LT-A 500F Vinson 4x4 Auto — 493cc (2002-2007)<br> • Suzuki LT-F 500F Vinson 4x4 Manual — 493cc (2002-2007)<br> • Suzuki LT-A 450X King Quad 4x4 — 450cc (2007-2010)<br> • Suzuki LT-A 500X King Quad 4x4 — 500cc (2009-2018)<br> • Suzuki LT-A 500XP King Quad Power Steering — 500cc (2011-Present)<br> • Suzuki LT-A 700X King Quad 4x4 — 695cc (2005-2007)<br> • Suzuki LT-A 750X King Quad 4x4 — 750cc (2008-Present)<br> • Suzuki LT-A 750XP King Quad Power Steering — 750cc (2011-Present)<br> • Kawasaki KRF 750 Teryx 4x4 — 749cc (2008-2013)<br> • Kawasaki KRT 750 Teryx4 4x4 — 749cc (2012-2013)<br><br> <b> Numbers:</b><br> • All Balls Racing: 19-1001 (U-Joint Kit)<br> • Suzuki: 27200-73813 (U-Joint Assembly)<br> • Suzuki: 27200-73814 (U-Joint Assembly)<br> • Kawasaki: 13310-0018 (U-Joint Assembly)<br> • Kawasaki: 13310-0019 (U-Joint Assembly)<br><br> <b>Specifications:</b><br> • Type: U-Joint Kit (Universal Joint)<br> • U-Joint Diameter: 25mm<br> • U-Joint Width: 43.6mm<br> • Snap Ring Type: Inside Snap Rings<br> • Material: Cold-Forged SCM-415 Steel<br> • Hardness: Case Hardened HRC58-61<br> • Journals: Precision Ground<br> • Grease: Hi-Temp Lithium Complex (NLGI #2)<br> • Seals: Quad Lip Seal Design<br> • Includes: U-Joint with Snap Rings and Cap Plug<br> • Position: Rear Driveshaft — Differential Side<br><br> <b>NOTE:</b> 25mm diameter x 43.6mm width with inside snap rings. Verify U-joint size matches your driveshaft before ordering.

• Rareelectrical Compatible With Kawasaki,Suzuki,All Balls Racing
• Suzuki Atv Models: • Lt-4Wd 250 Quadrunner — 250Cc (1987-2002) • Lt-F 250F Quadrunner 4X4 — 250Cc (1988-2001) • Lt-F 4Wdx King Quad 300 — 280-300Cc (1991-2002) • Lt-F 300F King Quad 4X4 — 300Cc (1999-2004) • Lt-F 500F Quadrunner 4X4 Manual — 493Cc (1998-2001) • Lt-A 500F Quadmaster 4X4 Auto — 493Cc (2000-2001) • Lt-A 500F Vinson 4X4 Auto — 493Cc (2002-2007) • Lt-F 500F Vinson 4X4 Manual — 493Cc (2002-2007) • Lt-A 450X King Quad 4X4 — 450Cc (2007-2010) • Lt-A 500X King Quad 4X4 — 500Cc (2009-2018) • Lt-A 500Xp King Quad Power Steering — 500Cc (2011-Present) • Lt-A 700X King Quad 4X4 — 695Cc (2005-2007) • Lt-A 750X King Quad 4X4 — 750Cc (2008-Present) • Lt-A 750Xp King Quad Power Steering — 750Cc (2011-Present) Kawasaki Utv Models: • Krf 750 Teryx 4X4 — 749Cc V-Twin (2008-2013) • Krt 750 Teryx4 4X4 — 749Cc V-Twin (2012-2013) U-Joint Position: • Rear Driveshaft — Differential Side Key Specifications For Fitment: • U-Joint Diameter: 25Mm — Must Match Your Driveshaft Yoke • U-Joint Width: 43.6Mm • Snap Ring Type: Inside Snap Rings Compatibility Notes: • 25Mm Diameter — Not Same As 22Mm (19-1002) Or 20Mm (19-1003) • Inside Snap Ring Retention — Verify Your Driveshaft Uses Inside Type • Pre-Greased With Hi-Temp Lithium Complex Grease • Cold-Forged Scm-415 Steel Construction • Cap Plug Included For Low-Clearance Applications
• All Balls Racing: • 19-1001 / 1205-0217 / 21-91001 (U-Joint Kit — Suzuki / Kawasaki) Suzuki : • 27200-73813 (U-Joint Assembly — King Quad / Quadrunner / Vinson) • 27200-73814 (U-Joint Assembly — King Quad / Quadrunner / Vinson) Kawasaki : • 13310-0018 (U-Joint Assembly — Teryx 750) • 13310-0019 (U-Joint Assembly — Teryx 750) Not Compatible With: • 22Mm Diameter U-Joints — All Balls 19-1002 (Different Size) • 20Mm Diameter U-Joints — All Balls 19-1003 (Different Size) • Outside Snap Ring Applications — This Uses Inside Snap Rings • Front Driveshaft Applications — Verify Position For Your Model • Cv Joint Applications — This Is A Standard U-Joint Product Specifications: • Type: U-Joint Kit (Universal Joint) • U-Joint Diameter: 25Mm • U-Joint Width: 43.6Mm • Snap Ring Type: Inside Snap Rings • Material: Cold-Forged Scm-415 Steel • Hardness: Case Hardened Hrc58-61 • Journals: Precision Ground • Grease: Hi-Temp Lithium Complex (Nlgi #2) • Seals: Quad Lip Seal Design • Includes: U-Joint With Snap Rings And Cap Plug • Position: Rear Driveshaft — Differential Side • Application: Suzuki King Quad / Quadrunner / Vinson / Kawasaki Teryx
• Source: Aftermarket
• One Year Manufacturer's Warranty.